American elm
Ulmus americana
American elm measures 830 lbf on the Janka scale, 36% softer than northern red oak.
- Of the three elms in the handbook, none is softer or lighter, and none bends more easily, shrinks more across the face or has a higher T/R ratio.
- African mahogany and western larch have exactly the same Janka figure.
- Across all 155 woods it falls in the top fifth for T/R ratio and in the bottom fifth for stiffness.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
American elmU.S. hardwoods medianOther woods
Cupping tendency
2.2616th highest of 1551.092.90Stiffness
1.34 M psi9.2 GPa30th most flexible of 1550.54 M psi4.06 M psiShrinkage across the face
9.5%radial 4.2%32nd highest of 1553.5%12.7%Density
0.460.50 at 12% MC58th lightest of 1550.250.96Bending strength
11,800 psi81.4 MPa62nd weakest of 1554,300 psi29,900 psiJanka hardness
830 lbf3,692 N65th softest of 15541st of 53 U.S. hardwoods; 28% below the U.S. hardwoods median240 lbf3,680 lbf
How much it moves
Most of its movement runs along the rings (T/R 2.26): quartersawn, the same board would lose 0.25 in. instead of 0.57 in.
0.57 in.
off a 6-inch flatsawn board, green to oven-dry
- Tangential
- 9.5%
- Radial
- 4.2%
- Volume
- 14.6%
- T/R ratio
- 2.26 (140th most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Hackberry
6% harder · 6% heavier · shrinks 0.6 points less across the face
- Slippery elm
4% harder · 4% heavier · shrinks 0.6 points less across the face
- American sycamore
7% softer · same density · shrinks 1.1 points less across the face
Among the elms
3rd hardest of 3, lbf.
Laboratory values
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Modulus of elasticity | 1.11M psi | 1.34M psi | +21% | 9.24GPa |
| Compression parallel to grain | 2,910psi | 5,520psi | +90% | 38.1MPa |
| Impact bending | 38in. | 39in. | +3% | 991mm |
| Tension perpendicular | 590psi | 660psi | +12% | 4.60MPa |
| Modulus of rupture | 7,200psi | 11,800psi | +64% | 81.4MPa |
| Compression perpendicular | 360psi | 690psi | +92% | 4.80MPa |
| Work to maximum load | 11.8in-lbf/in³ | 13in-lbf/in³ | +10% | 89.6kJ/m³ |
| Side hardness | 620lbf | 830lbf | +34% | 3,692N |
| Shear parallel to grain | 1,000psi | 1,510psi | +51% | 10.4MPa |
Wood Handbook Table 5-3b, Table 4-3. Data & method · Guides