Mockernut hickory
Carya tomentosa
Mockernut hickory measures 1,970 lbf on the Janka scale, 53% harder than northern red oak.
- Only greenheart, azobe and karri shrink more through the thickness.
- Among U.S. hardwoods, only pignut hickory is harder or stiffer.
- Of the four hickories in the handbook, none has a T/R ratio closer to 1.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
Mockernut hickoryU.S. hardwoods medianOther woods
Shrinkage across the face
11.0%radial 7.7%11th highest of 1553.5%12.7%Cupping tendency
1.4317th lowest of 1551.092.90Janka hardness
1,970 lbf8,763 N19th hardest of 1552nd of 53 U.S. hardwoods; 70% above the U.S. hardwoods median240 lbf3,680 lbfBending strength
19,200 psi132.4 MPa21st strongest of 15548% above the U.S. hardwoods median4,300 psi29,900 psiStiffness
2.22 M psi15.3 GPa26th stiffest of 15539% above the U.S. hardwoods median0.54 M psi4.06 M psiDensity
0.640.72 at 12% MC31st heaviest of 1550.250.96
For its weight: strength-to-weight 30,000 psi (18th of 155).
How much it moves
It shrinks a lot, but the two directions stay close (T/R 1.43), so a board loses size more than it changes shape.
0.66 in.
off a 6-inch flatsawn board, green to oven-dry; quartersawn 0.46 in.
- Tangential
- 11.0%
- Radial
- 7.7%
- Volume
- 17.8%
- T/R ratio
- 1.43 (17th most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Pignut hickory
9% harder · 3% heavier · shrinks 0.5 points more across the face
- Shagbark hickory
5% softer · same density · shrinks 0.5 points less across the face
- Jarrah
3% softer · 5% heavier · same face shrinkage
Among the hickories
2nd hardest of 4, lbf.
Laboratory values
Its most unusual laboratory figure is impact bending height: 2nd highest of the 89 woods with a published value.
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Impact bending | 88in. | 77in. | −12% | 1,956mm |
| Compression perpendicular | 810psi | 1,730psi | +114% | 11.9MPa |
| Work to maximum load | 26.1in-lbf/in³ | 22.6in-lbf/in³ | −13% | 155.8kJ/m³ |
| Side hardness | 1,440lbf | 1,970lbf | +37% | 8,763N |
| Modulus of rupture | 11,100psi | 19,200psi | +73% | 132.4MPa |
| Modulus of elasticity | 1.57M psi | 2.22M psi | +41% | 15.3GPa |
| Compression parallel to grain | 4,480psi | 8,940psi | +100% | 61.6MPa |
| Shear parallel to grain | 1,280psi | 1,740psi | +36% | 12MPa |
Wood Handbook Table 5-3b, Table 4-3. Data & method · Guides