Pilon
Hyeronima spp.
Pilon measures 1,700 lbf on the Janka scale, 32% harder than northern red oak.
- Only four of the 155 woods shrink more across the face.
- It sits in the top quarter of the list for both hardness and shrinkage across the face.
- Black locust has exactly the same Janka figure.
- Overall it falls in the top fifth for hardness, density, bending strength, stiffness, radial shrinkage, volumetric shrinkage and T/R ratio.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
PilonImported woods medianOther woods
Shrinkage across the face
11.7%radial 5.4%5th highest of 15548% above the imported woods median3.5%12.7%Stiffness
2.27 M psi15.7 GPa19th stiffest of 1550.54 M psi4.06 M psiCupping tendency
2.1726th highest of 1551.092.90Bending strength
18,200 psi125.5 MPa27th strongest of 1554,300 psi29,900 psiDensity
0.6528th heaviest of 1550.250.96Janka hardness
1,700 lbf7,562 N31st hardest of 15527th of 65 imported woods; 31% above the imported woods median240 lbf3,680 lbf
How much it moves
Most of its movement runs along the rings (T/R 2.17): quartersawn, the same board would lose 0.32 in. instead of 0.70 in.
0.70 in.
off a 6-inch flatsawn board, green to oven-dry
- Tangential
- 11.7%
- Radial
- 5.4%
- Volume
- 17.0%
- T/R ratio
- 2.17 (130th most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Keruing
25% softer · 6% heavier · shrinks 0.8 points less across the face
- Scarlet oak
18% softer · 8% lighter · shrinks 0.9 points less across the face
- Angelin
3% harder · same density · shrinks 1.9 points less across the face
Woods of similar hardness
The eight nearest on the Janka scale, lbf.
Laboratory values
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Modulus of elasticity | 1.88M psi | 2.27M psi | +21% | 15.7GPa |
| Compression parallel to grain | 4,960psi | 9,620psi | +94% | 66.3MPa |
| Modulus of rupture | 10,700psi | 18,200psi | +70% | 125.5MPa |
| Side hardness | 1,220lbf | 1,700lbf | +39% | 7,562N |
| Shear parallel to grain | 1,200psi | 1,720psi | +43% | 11.9MPa |
| Work to maximum load | 8.30in-lbf/in³ | 12.1in-lbf/in³ | +46% | 83.4kJ/m³ |
Wood Handbook Table 5-5b, Table 4-4. Data & method · Guides