Purpleheart
Peltogyne spp.
Purpleheart measures 1,860 lbf on the Janka scale, 44% harder than northern red oak.
- It pairs hardness with little movement: harder than 86% of the woods, yet in the lowest quarter for shrinkage across the face.
- Drying barely changes its hardness: from 1,810 lbf green, it gains only 3% by 12% moisture, against a median of 31%.
- Across all 155 woods it falls in the top fifth for hardness, density, bending strength and stiffness and in the bottom fifth for face shrinkage, radial shrinkage and volumetric shrinkage.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
PurpleheartImported woods medianOther woods
Stiffness
2.27 M psi15.7 GPa19th stiffest of 1550.54 M psi4.06 M psiBending strength
19,200 psi132.4 MPa21st strongest of 1554,300 psi29,900 psiDensity
0.6722nd heaviest of 1550.250.96Shrinkage across the face
6.1%radial 3.2%22nd lowest of 1553.5%12.7%Janka hardness
1,860 lbf8,274 N23rd hardest of 15520th of 65 imported woods; 43% above the imported woods median240 lbf3,680 lbfCupping tendency
1.9159th highest of 1551.092.90
How much it moves
Its face shrinkage of 6.1% is in the lowest quarter of the list, with an ordinary T/R ratio of 1.91.
0.37 in.
off a 6-inch flatsawn board, green to oven-dry; quartersawn 0.19 in.
- Tangential
- 6.1%
- Radial
- 3.2%
- Volume
- 9.9%
- T/R ratio
- 1.91 (95th most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Afrormosia
16% softer · 9% lighter · shrinks 0.3 points more across the face
- Para-angelim
8% softer · 6% lighter · shrinks 1.0 points more across the face
- Sepetir
24% softer · 16% lighter · shrinks 0.9 points more across the face
Woods of similar hardness
The eight nearest on the Janka scale, lbf.
Laboratory values
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Compression parallel to grain | 7,020psi | 10,320psi | +47% | 71.2MPa |
| Shear parallel to grain | 1,640psi | 2,220psi | +35% | 15.3MPa |
| Modulus of elasticity | 2.00M psi | 2.27M psi | +14% | 15.7GPa |
| Modulus of rupture | 13,700psi | 19,200psi | +40% | 132.4MPa |
| Work to maximum load | 14.8in-lbf/in³ | 17.6in-lbf/in³ | +19% | 121.3kJ/m³ |
| Side hardness | 1,810lbf | 1,860lbf | +3% | 8,274N |
Wood Handbook Table 5-5b, Table 4-4. Data & method · Guides