Pacific silver fir
Abies amabilis
Pacific silver fir measures 430 lbf on the Janka scale, about 33% as hard as northern red oak.
- No other U.S. softwood in the tables shrinks more across the face.
- Only six of the 155 woods are stiffer for their weight.
- Of the seven true firs in the handbook, none is heavier or stiffer.
- Eastern cottonwood and obeche have exactly the same Janka figure.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
Pacific silver firU.S. softwoods medianOther woods
Janka hardness
430 lbf1,913 N18th softest of 15526th of 37 U.S. softwoods240 lbf3,680 lbfCupping tendency
2.0935th highest of 1551.092.90Density
0.400.43 at 12% MC36th lightest of 1550.250.96Shrinkage across the face
9.2%radial 4.4%39th highest of 15530% above the U.S. softwoods median3.5%12.7%Bending strength
11,000 psi75.8 MPa51st weakest of 1554,300 psi29,900 psiStiffness
1.76 M psi12.1 GPa66th stiffest of 1550.54 M psi4.06 M psi
For its weight: stiffness-to-weight 4.40 (7th of 155).
How much it moves
Most of its movement runs along the rings (T/R 2.09): quartersawn, the same board would lose 0.26 in. instead of 0.55 in.
0.55 in.
off a 6-inch flatsawn board, green to oven-dry
- Tangential
- 9.2%
- Radial
- 4.4%
- Volume
- 13.0%
- T/R ratio
- 2.09 (121st most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Noble fir
5% softer · 8% lighter · shrinks 0.9 points less across the face
- Western hemlock
26% harder · 5% heavier · shrinks 1.4 points less across the face
- California red fir
16% harder · 10% lighter · shrinks 1.3 points less across the face
Among the true firs
4th hardest of 7, lbf.
Laboratory values
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Side hardness | 310lbf | 430lbf | +39% | 1,913N |
| Compression perpendicular | 220psi | 450psi | +105% | 3.10MPa |
| Shear parallel to grain | 750psi | 1,220psi | +63% | 8.40MPa |
| Impact bending | 21in. | 24in. | +14% | 610mm |
| Modulus of rupture | 6,400psi | 11,000psi | +72% | 75.8MPa |
| Work to maximum load | 6.00in-lbf/in³ | 9.30in-lbf/in³ | +55% | 64.1kJ/m³ |
| Compression parallel to grain | 3,140psi | 6,410psi | +104% | 44.2MPa |
| Modulus of elasticity | 1.42M psi | 1.76M psi | +24% | 12.1GPa |
| Tension perpendicular | 240psi | not tested | — | — |
Wood Handbook Table 5-3b, Table 4-3. Data & method · Guides