Azobe
Lophira alata
Azobe measures 3,350 lbf on the Janka scale, 160% harder than northern red oak.
- Only greenheart shrinks more through the thickness, only ipe, marishballi and manbarklak are harder, and only four woods are heavier.
- Only five woods sit further above the density–hardness trend: a specific gravity of 0.87 would point to about 2,800 lbf.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
AzobeImported woods medianOther woods
Janka hardness
3,350 lbf14,902 N4th hardest of 1554th of 65 imported woods; 158% above the imported woods median240 lbf3,680 lbfDensity
0.875th heaviest of 15543% above the imported woods median0.250.96Bending strength
24,500 psi168.9 MPa8th strongest of 15547% above the imported woods median4,300 psi29,900 psiCupping tendency
1.318th lowest of 1551.092.90Shrinkage across the face
11.0%radial 8.4%11th highest of 15539% above the imported woods median3.5%12.7%Stiffness
2.47 M psi17.0 GPa15th stiffest of 1550.54 M psi4.06 M psi
How much it moves
It shrinks a lot, but the two directions stay close (T/R 1.31), so a board loses size more than it changes shape.
0.66 in.
off a 6-inch flatsawn board, green to oven-dry; quartersawn 0.50 in.
- Tangential
- 11.0%
- Radial
- 8.4%
- Volume
- 17.0%
- T/R ratio
- 1.31 (8th most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Karri
39% softer · 6% lighter · shrinks 1.4 points more across the face
- Greenheart
30% softer · 8% lighter · shrinks 1.4 points less across the face
- Mora
31% softer · 10% lighter · shrinks 1.2 points less across the face
Woods of similar hardness
The eight nearest on the Janka scale, lbf.
Laboratory values
Its most unusual laboratory figure is shear strength: 2nd highest of the 154 woods with a published value.
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Shear parallel to grain | 2,040psi | 2,960psi | +45% | 20.4MPa |
| Side hardness | 2,890lbf | 3,350lbf | +16% | 14,902N |
| Compression parallel to grain | 9,520psi | 12,600psi | +32% | 86.9MPa |
| Modulus of rupture | 16,900psi | 24,500psi | +45% | 168.9MPa |
| Modulus of elasticity | 2.16M psi | 2.47M psi | +14% | 17.0GPa |
| Work to maximum load | 12in-lbf/in³ | not tested | — | — |
Wood Handbook Table 5-5b, Table 4-4. Data & method · Guides