Black oak
Quercus velutina
Black oak measures 1,210 lbf on the Janka scale, 6% softer than northern red oak.
- Only eastern white pine and subalpine fir have a higher T/R ratio, and only nine woods shrink more across the face.
- Laurel oak has exactly the same Janka figure.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
Black oakU.S. hardwoods medianOther woods
Cupping tendency
2.523rd highest of 15534% above the U.S. hardwoods median1.092.90Shrinkage across the face
11.1%radial 4.4%10th highest of 1553.5%12.7%Density
0.560.61 at 12% MC52nd heaviest of 1550.250.96Janka hardness
1,210 lbf5,382 N60th hardest of 15521st of 53 U.S. hardwoods240 lbf3,680 lbfBending strength
13,900 psi95.8 MPa64th strongest of 1554,300 psi29,900 psiStiffness
1.64 M psi11.3 GPa76th stiffest of 1550.54 M psi4.06 M psi
How much it moves
Most of its movement runs along the rings (T/R 2.52): quartersawn, the same board would lose 0.26 in. instead of 0.67 in.
0.67 in.
off a 6-inch flatsawn board, green to oven-dry
- Tangential
- 11.1%
- Radial
- 4.4%
- Volume
- 15.1%
- T/R ratio
- 2.52 (153rd most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Swamp chestnut oak
2% harder · 7% heavier · shrinks 0.3 points less across the face
- Chestnut oak
7% softer · 2% heavier · shrinks 0.3 points less across the face
- Laurel oak
Same hardness · same density · shrinks 1.2 points less across the face
Among the oaks
10th hardest of 15, lbf; the neighbours either side are shown, the rest are on the oaks page.
Laboratory values
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Impact bending | 40in. | 41in. | +2% | 1,041mm |
| Shear parallel to grain | 1,220psi | 1,910psi | +57% | 13.2MPa |
| Compression perpendicular | 710psi | 930psi | +31% | 6.40MPa |
| Work to maximum load | 12.2in-lbf/in³ | 13.7in-lbf/in³ | +12% | 94.5kJ/m³ |
| Side hardness | 1,060lbf | 1,210lbf | +14% | 5,382N |
| Modulus of rupture | 8,200psi | 13,900psi | +70% | 95.8MPa |
| Compression parallel to grain | 3,470psi | 6,520psi | +88% | 45MPa |
| Modulus of elasticity | 1.18M psi | 1.64M psi | +39% | 11.3GPa |
Wood Handbook Table 5-3b, Table 4-3. Data & method · Guides