Scarlet oak
Quercus coccinea
Scarlet oak measures 1,400 lbf on the Janka scale, 9% harder than northern red oak.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
Scarlet oakU.S. hardwoods medianOther woods
Cupping tendency
2.455th highest of 15530% above the U.S. hardwoods median1.092.90Shrinkage across the face
10.8%radial 4.4%15th highest of 1553.5%12.7%Bending strength
17,400 psi120.0 MPa32nd strongest of 15534% above the U.S. hardwoods median4,300 psi29,900 psiDensity
0.600.67 at 12% MC39th heaviest of 1550.250.96Janka hardness
1,400 lbf6,228 N43rd hardest of 15511th of 53 U.S. hardwoods240 lbf3,680 lbfStiffness
1.91 M psi13.2 GPa46th stiffest of 1550.54 M psi4.06 M psi
How much it moves
Most of its movement runs along the rings (T/R 2.45): quartersawn, the same board would lose 0.26 in. instead of 0.65 in.
0.65 in.
off a 6-inch flatsawn board, green to oven-dry
- Tangential
- 10.8%
- Radial
- 4.4%
- Volume
- 14.7%
- T/R ratio
- 2.45 (150th most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Kapur
12% softer · 7% heavier · shrinks 0.6 points less across the face
- Sugar maple
4% harder · 7% lighter · shrinks 0.9 points less across the face
- Water oak
15% softer · 7% lighter · shrinks 1.0 points less across the face
Among the oaks
4th hardest of 15, lbf; the neighbours either side are shown, the rest are on the oaks page.
Laboratory values
Its most unusual laboratory figure is impact bending height: 8th highest of the 89 woods with a published value.
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Impact bending | 54in. | 53in. | −2% | 1,346mm |
| Work to maximum load | 15in-lbf/in³ | 20.5in-lbf/in³ | +37% | 141.3kJ/m³ |
| Tension perpendicular | 700psi | 870psi | +24% | 6.00MPa |
| Compression perpendicular | 830psi | 1,120psi | +35% | 7.70MPa |
| Modulus of rupture | 10,400psi | 17,400psi | +67% | 120MPa |
| Side hardness | 1,200lbf | 1,400lbf | +17% | 6,228N |
| Compression parallel to grain | 4,090psi | 8,330psi | +104% | 57.4MPa |
| Modulus of elasticity | 1.48M psi | 1.91M psi | +29% | 13.2GPa |
| Shear parallel to grain | 1,410psi | 1,890psi | +34% | 13MPa |
Wood Handbook Table 5-3b, Table 4-3. Data & method · Guides