Redwood (young-growth)
Sequoia sempervirens
Redwood (young-growth) measures 420 lbf on the Janka scale, about 33% as hard as northern red oak.
- Only ceiba and eastern white pine shrink less through the thickness, only macawood, redwood (old-growth) and western redcedar lose less volume on drying, and only seven woods are weaker in bending and eight shrink less across the face.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
Redwood (young-growth)U.S. softwoods medianOther woods
Bending strength
7,900 psi54.5 MPa8th weakest of 1554,300 psi29,900 psiStiffness
1.10 M psi7.6 GPa9th most flexible of 15527% below the U.S. softwoods median0.54 M psi4.06 M psiShrinkage across the face
4.9%radial 2.2%9th lowest of 15531% below the U.S. softwoods median3.5%12.7%Density
0.340.35 at 12% MC13th lightest of 1550.250.96Janka hardness
420 lbf1,868 N16th softest of 15527th of 37 U.S. softwoods240 lbf3,680 lbfCupping tendency
2.2319th highest of 1551.092.90
How much it moves
Total movement is small, but most of it runs along the rings (T/R 2.23), so a flatsawn board still loses 2.2 times the width of a quartersawn one.
0.29 in.
off a 6-inch flatsawn board, green to oven-dry; quartersawn 0.13 in.
- Tangential
- 4.9%
- Radial
- 2.2%
- Volume
- 7.0%
- T/R ratio
- 2.23 (135th most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Western redcedar
17% softer · 9% lighter · shrinks 0.1 points more across the face
- Sugar pine
10% softer · same density · shrinks 0.7 points more across the face
- Eastern white pine
10% softer · same density · shrinks 1.2 points more across the face
Woods of similar hardness
The eight nearest on the Janka scale, lbf.
Laboratory values
Its most unusual laboratory figure is impact bending height: 3rd lowest of the 89 woods with a published value.
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Impact bending | 16in. | 15in. | −6% | 381mm |
| Work to maximum load | 5.70in-lbf/in³ | 5.20in-lbf/in³ | −9% | 35.9kJ/m³ |
| Modulus of rupture | 5,900psi | 7,900psi | +34% | 54.5MPa |
| Modulus of elasticity | 0.96M psi | 1.10M psi | +15% | 7.58GPa |
| Tension perpendicular | 300psi | 250psi | −17% | 1.70MPa |
| Side hardness | 350lbf | 420lbf | +20% | 1,868N |
| Compression parallel to grain | 3,110psi | 5,220psi | +68% | 36MPa |
| Compression perpendicular | 270psi | 520psi | +93% | 3.60MPa |
| Shear parallel to grain | 890psi | 1,110psi | +25% | 7.70MPa |
Wood Handbook Table 5-3b, Table 4-3. Data & method · Guides