Shellbark hickory
Carya laciniosa
Shellbark hickory measures 1,810 lbf on the Janka scale, 40% harder than northern red oak.
- Only overcup oak shrinks more across the face, only karri loses more volume on drying, and only five woods shrink more through the thickness.
- Of the four hickories in the handbook, none is softer or lighter, and none bends more easily or has a higher T/R ratio.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
Shellbark hickoryU.S. hardwoods medianOther woods
Shrinkage across the face
12.6%radial 7.6%2nd highest of 15542% above the U.S. hardwoods median3.5%12.7%Janka hardness
1,810 lbf8,051 N24th hardest of 1554th of 53 U.S. hardwoods; 56% above the U.S. hardwoods median240 lbf3,680 lbfBending strength
18,100 psi124.8 MPa28th strongest of 15539% above the U.S. hardwoods median4,300 psi29,900 psiDensity
0.620.69 at 12% MC36th heaviest of 1550.250.96Stiffness
1.89 M psi13.0 GPa48th stiffest of 1550.54 M psi4.06 M psiCupping tendency
1.6651st lowest of 1551.092.90
How much it moves
Its face shrinkage of 12.6% is in the top quarter of the list, with an ordinary T/R ratio of 1.66.
0.76 in.
off a 6-inch flatsawn board, green to oven-dry; quartersawn 0.46 in.
- Tangential
- 12.6%
- Radial
- 7.6%
- Volume
- 19.2%
- T/R ratio
- 1.66 (51st most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Jarrah
6% harder · 8% heavier · shrinks 1.6 points less across the face
- Mockernut hickory
9% harder · 3% heavier · shrinks 1.6 points less across the face
- Pignut hickory
18% harder · 6% heavier · shrinks 1.1 points less across the face
Among the hickories
4th hardest of 4, lbf.
Laboratory values
Its most unusual laboratory figure is impact bending height: the highest of the 89 woods with a published value.
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Impact bending | 104in. | 88in. | −15% | 2,235mm |
| Compression perpendicular | 810psi | 1,800psi | +122% | 12.4MPa |
| Work to maximum load | 29.9in-lbf/in³ | 23.6in-lbf/in³ | −21% | 162.7kJ/m³ |
| Shear parallel to grain | 1,190psi | 2,110psi | +77% | 14.5MPa |
| Side hardness | 1,670lbf | 1,810lbf | +8% | 8,051N |
| Modulus of rupture | 10,500psi | 18,100psi | +72% | 124.8MPa |
| Modulus of elasticity | 1.34M psi | 1.89M psi | +41% | 13.0GPa |
| Compression parallel to grain | 3,920psi | 8,000psi | +104% | 55.2MPa |
Wood Handbook Table 5-3b, Table 4-3. Data & method · Guides