Bigleaf maple
Acer macrophyllum
Bigleaf maple measures 850 lbf on the Janka scale, 34% softer than northern red oak.
- Of the five maples in the handbook, none shrinks less across the face or has a T/R ratio closer to 1.
- Black ash and sweetgum have exactly the same Janka figure.
- On the Janka scale its nearest neighbours are western larch at 830 lbf and slippery elm at 860 lbf.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
Bigleaf mapleU.S. hardwoods medianOther woods
Stiffness
1.45 M psi10.0 GPa43rd most flexible of 1550.54 M psi4.06 M psiBending strength
10,700 psi73.8 MPa45th weakest of 1554,300 psi29,900 psiShrinkage across the face
7.1%radial 3.7%48th lowest of 1553.5%12.7%Density
0.440.48 at 12% MC50th lightest of 1550.250.96Cupping tendency
1.9255th highest of 1551.092.90Janka hardness
850 lbf3,781 N68th softest of 15538th of 53 U.S. hardwoods; 27% below the U.S. hardwoods median240 lbf3,680 lbf
How much it moves
Both its face shrinkage (7.1%) and its T/R ratio (1.92) sit in the middle half of the list.
0.43 in.
off a 6-inch flatsawn board, green to oven-dry; quartersawn 0.22 in.
- Tangential
- 7.1%
- Radial
- 3.7%
- Volume
- 11.6%
- T/R ratio
- 1.92 (98th most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Black cherry
12% harder · 7% heavier · same face shrinkage
- Yellow meranti
9% softer · 4% heavier · shrinks 0.9 points more across the face
- Water tupelo
4% harder · 4% heavier · shrinks 0.5 points more across the face
Among the maples
4th hardest of 5, lbf.
Laboratory values
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Work to maximum load | 8.70in-lbf/in³ | 7.80in-lbf/in³ | −10% | 53.8kJ/m³ |
| Modulus of elasticity | 1.10M psi | 1.45M psi | +32% | 10GPa |
| Modulus of rupture | 7,400psi | 10,700psi | +45% | 73.8MPa |
| Compression parallel to grain | 3,240psi | 5,950psi | +84% | 41MPa |
| Tension perpendicular | 600psi | 540psi | −10% | 3.70MPa |
| Shear parallel to grain | 1,110psi | 1,730psi | +56% | 11.9MPa |
| Impact bending | 23in. | 28in. | +22% | 711mm |
| Side hardness | 620lbf | 850lbf | +37% | 3,781N |
| Compression perpendicular | 450psi | 750psi | +67% | 5.20MPa |
Wood Handbook Table 5-3b, Table 4-3. Data & method · Guides