Karri
Eucalyptus diversicolor
Karri measures 2,040 lbf on the Janka scale, 58% harder than northern red oak.
- No other wood in the tables loses more volume on drying.
- Only overcup oak and shellbark hickory shrink more across the face, and only greenheart and azobe shrink more through the thickness.
- Only two woods sit further below the density–hardness trend: a specific gravity of 0.82 would point to about 2,560 lbf.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
KarriImported woods medianOther woods
Shrinkage across the face
12.4%radial 7.8%3rd highest of 15557% above the imported woods median3.5%12.7%Density
0.829th heaviest of 15534% above the imported woods median0.250.96Stiffness
2.60 M psi17.9 GPa12th stiffest of 15530% above the imported woods median0.54 M psi4.06 M psiBending strength
20,160 psi139.0 MPa16th strongest of 1554,300 psi29,900 psiJanka hardness
2,040 lbf9,074 N18th hardest of 15517th of 65 imported woods; 57% above the imported woods median240 lbf3,680 lbfCupping tendency
1.5939th lowest of 1551.092.90
How much it moves
It shrinks a lot, but the two directions stay close (T/R 1.59), so a board loses size more than it changes shape.
0.74 in.
off a 6-inch flatsawn board, green to oven-dry; quartersawn 0.47 in.
- Tangential
- 12.4%
- Radial
- 7.8%
- Volume
- 20.2%
- T/R ratio
- 1.59 (39th most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Pignut hickory
5% harder · 20% lighter · shrinks 0.9 points less across the face
- Azobe
64% harder · 6% heavier · shrinks 1.4 points less across the face
- Tropical oak (roble)
22% harder · 7% lighter · shrinks 0.7 points less across the face
Woods of similar hardness
The eight nearest on the Janka scale, lbf.
Laboratory values
Its most unusual laboratory figure is work to maximum load: 6th highest of the 142 woods with a published value.
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Work to maximum load | 11.6in-lbf/in³ | 25.4in-lbf/in³ | +119% | 175.1kJ/m³ |
| Shear parallel to grain | 1,510psi | 2,420psi | +60% | 16.7MPa |
| Modulus of elasticity | 1.94M psi | 2.60M psi | +34% | 17.9GPa |
| Compression parallel to grain | 5,450psi | 10,800psi | +98% | 74.5MPa |
| Modulus of rupture | 11,200psi | 20,160psi | +80% | 139MPa |
| Side hardness | 1,360lbf | 2,040lbf | +50% | 9,074N |
Wood Handbook Table 5-5b, Table 4-4. Data & method · Guides