Cucumbertree
Magnolia acuminata
Cucumbertree measures 700 lbf on the Janka scale, 46% softer than northern red oak.
- Silver maple has exactly the same Janka figure.
- On the Janka scale its nearest neighbours are shortleaf pine at 690 lbf and Douglas-fir (Coast) at 710 lbf.
U.S. hardwoodsU.S. softwoodsImported woodsNorthern red oak
Six measures
CucumbertreeU.S. hardwoods medianOther woods
Shrinkage across the face
8.8%radial 5.2%46th highest of 1553.5%12.7%Density
0.440.48 at 12% MC50th lightest of 1550.250.96Janka hardness
700 lbf3,114 N55th softest of 15544th of 53 U.S. hardwoods; 40% below the U.S. hardwoods median240 lbf3,680 lbfStiffness
1.82 M psi12.6 GPa55th stiffest of 1550.54 M psi4.06 M psiCupping tendency
1.6958th lowest of 1551.092.90Bending strength
12,300 psi84.8 MPa64th weakest of 1554,300 psi29,900 psi
For its weight: stiffness-to-weight 4.14 (20th of 155).
How much it moves
Both its face shrinkage (8.8%) and its T/R ratio (1.69) sit in the middle half of the list.
0.53 in.
off a 6-inch flatsawn board, green to oven-dry; quartersawn 0.31 in.
- Tangential
- 8.8%
- Radial
- 5.2%
- Volume
- 13.6%
- T/R ratio
- 1.69 (58th most stable of 155)
End view, shrinkage drawn 3× life size.
Closest substitutes
- Black ash
21% harder · 2% heavier · shrinks 1.0 points less across the face
- Slippery elm
23% harder · 9% heavier · shrinks 0.1 points more across the face
- Banak
27% softer · 4% lighter · same face shrinkage
Woods of similar hardness
The eight nearest on the Janka scale, lbf.
Laboratory values
| Property | Green | Dry, 12% MC | Change when dried | Metric, 12% MC |
|---|---|---|---|---|
| Compression perpendicular | 330psi | 570psi | +73% | 3.90MPa |
| Impact bending | 30in. | 35in. | +17% | 889mm |
| Tension perpendicular | 440psi | 660psi | +50% | 4.60MPa |
| Shear parallel to grain | 990psi | 1,340psi | +35% | 9.20MPa |
| Modulus of elasticity | 1.56M psi | 1.82M psi | +17% | 12.6GPa |
| Side hardness | 520lbf | 700lbf | +35% | 3,114N |
| Compression parallel to grain | 3,140psi | 6,310psi | +101% | 43.5MPa |
| Modulus of rupture | 7,400psi | 12,300psi | +66% | 84.8MPa |
| Work to maximum load | 10in-lbf/in³ | 12.2in-lbf/in³ | +22% | 84.1kJ/m³ |
Wood Handbook Table 5-3b, Table 4-3. Data & method · Guides